JG_TpsLabStudio_LTS/exe/apps/DevicesApp/commands/程控命令.xml

<?xml version="1.0" encoding="utf-8" ?>
<ScpiCommands>
  <Devices>
    <DeviceCommand DeviceType="信号源">
      <Models>
        <string>ESG-D4000B</string>
        <string>ESG-3000B</string>
        <string>E4421B</string>
        <string>E4433B</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value=":SYSTem:PRESet" Description="{0}频率，单位MHz"/>
        <Command Key="OPC" Value="*OPC?"/>
        <Command Key="设置频率" Value=":FREQ:CW {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="设置功率" Value=":POW:AMPL {0} dBm" Description="{0}频率，单位MHz"/>
        <Command Key="射频开关开" Value=":OUTP:STAT ON" Description="单位V"/>
        <Command Key="射频开关关" Value=":OUTP:STAT OFF" Description="单位A"/>
        <Command Key="调制关" Value=":OUTP:MOD:STAT OFF" Description="{0}电流值，单位A，CC模式下"/>
        <Command Key="调制开" Value=":OUTP:MOD:STAT ON" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="Step扫描模式" Value=":LIST:TYPE STEP" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="Step扫描点数" Value=":SWEep:POINts {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="单次扫描" Value=":INITiate" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="单次扫描模式" Value=":INITiate:CONTinuous OFF" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="开启Sweep扫频" Value=":FREQuency:MODE LIST" Description="电压值，单位V，CV模式下"/>
        <Command Key="关闭Sweep扫频" Value=":FREQuency:MODE CW" Description="电压值，单位V，CV模式下"/>
        <Command Key="扫描起始频率" Value=":FREQuency:STARt {0} MHz" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="扫描终止频率" Value=":FREQuency:Stop {0} MHz" Description="{0}电压值，单位V，CV模式下"/>
       <Command Key="连续扫描模式" Value=":INITiate:CONTinuous ON" Description="{0}电压值，单位V，CV模式下"/>
      </Commands>
    </DeviceCommand>
	
	<DeviceCommand DeviceType="函数发生器">
      <Models>
        <string>33210A</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value="*RST" Description="仪器复位"/>
		<Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
		<Command Key="定义函数" Value="APPLy:{0} {1}, {2}, {3}" Description="选择函数、频率、振幅、偏移,example:APPL:SIN 5 KHZ, 3.0 VPP, -2.5 V"/>
		<Command Key="设置波形" Value="FUNCtion {0}" Description="设置波形,{0} SINusoid|SQUare|RAMP|PULSe|NOISe|DC|USER"/>
		<Command Key="设置频率" Value="FREQuency {0} MHz" Description="设置频率,{0}  频率|MINimum|MAXimum,单位MHz"/>
		<Command Key="设置振幅" Value="VOLTage {0}" Description="设置振幅,{0} 振幅|MINimum|MAXimum,单位V"/>
        <Command Key="设置偏移" Value="VOLTage:OFFSet {0}" Description="设置偏移,{0} 偏移|MINimum|MAXimum,单位V"/>
		<Command Key="设置高电平" Value="VOLTage:HIGH {0}" Description="设置高电平,{0} 电压|MINimum|MAXimum,单位V"/>
		<Command Key="设置低电平" Value="VOLTage:LOW {0}" Description="设置低电平,{0} 电压|MINimum|MAXimum,单位V"/>
		<Command Key="设置振幅单位" Value="VOLTage:UNIT {0}" Description="设置振幅单位,{0} VPP|VRMS|DBM"/>
		<Command Key="设置脉冲的占空比" Value="FUNCtion:SQUare:DCYCle {0}" Description="设置振幅单位,{0} 百分比|MINimum|MAXimum"/>
		<Command Key="输出开" Value="OUTPut ON" Description="输出开"/>
		<Command Key="输出关" Value="OUTPut OFF" Description="输出关"/>
		<Command Key="波形极性" Value="OUTPut:POLarity {0}" Description="相对于偏移电压将波形是否反向,{0} NORMal|INVerted"/>
		<Command Key="打开同步信号" Value="OUTPut:SYNC ON" Description="打开同步信号"/>
		<Command Key="关闭同步信号" Value="OUTPut:SYNC OFF" Description="关闭同步信号"/>
		
		<Command Key="设置脉冲周期" Value="PULSe:PERiod {0}" Description="设置脉冲周期,{0} < 秒 >|MINimum|MAXimum"/>
		<Command Key="脉冲宽度配置模式" Value="FUNCtion:PULSe:HOLD {0}" Description="设置函数发生器以保持脉冲宽度或脉冲占空比,{0} WIDTh|DCYCle"/>
		<Command Key="设置脉冲宽度" Value="FUNCtion:PULSe:WIDTh {0}" Description="设置脉冲宽度,{0} < 秒 >|MINimum|MAXimum"/>
		<Command Key="设置脉冲占空比" Value="FUNCtion:PULSe:DCYCle {0}" Description="设置脉冲占空比,{0} < 百分比 >|MINimum|MAXimum"/>
		<Command Key="设置边沿时间" Value="FUNCtion:PULSe:TRANsition {0}" Description="设置上升沿和下降沿的边沿时间,{0} < 秒 >|MINimum|MAXimum"/>
		
		<Command Key="AM调制波形" Value="AM:INTernal {0}" Description="选择AM调制波形仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="AM调制频率" Value="AM:INTernal:FREQuency {0}" Description="设置AM调制波形频率仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="AM调制源" Value="AM:SOURce {0}" Description="选择AM调制源内部或外部,{0} INTernal|EXTernal"/>
		<Command Key="AM调制开" Value="AM:STATe ON" Description="AM调制开"/>
		<Command Key="AM调制关" Value="AM:STATe OFF" Description="AM调制关"/>
		
		<Command Key="FM调制波形" Value="FM:INTernal {0}" Description="选择FM调制波形仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="FM调制频率" Value="FM:INTernal:FREQuency {0}" Description="设置FM调制波形频率仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="FM调制源" Value="FM:SOURce {0}" Description="选择FM调制源内部或外部,{0} INTernal|EXTernal"/>
		<Command Key="FM调制开" Value="FM:STATe ON" Description="FM调制开"/>
		<Command Key="FM调制关" Value="FM:STATe OFF" Description="FM调制关"/>
		
		<Command Key="PWM调制波形" Value="PWM:INTernal {0}" Description="选择PWM调制波形仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="PWM调制频率" Value="PWM:INTernal:FREQuency {0}" Description="设置PWM调制波形频率仅在内部源时使用,{0} SINusoid|SQUare|RAMP|NRAMp|TRIangle|NOISe|USER"/>
		<Command Key="PWM调制占空比" Value="PWM:DEViation:DCYCle {0}" Description="PWM调制占空比,{0} < 偏差，百分比 >|MINimum|MAXimum"/>
		<Command Key="PWM调制源" Value="PWM:SOURce {0}" Description="选择PWM调制源内部或外部,{0} INTernal|EXTernal"/>
		<Command Key="PWM调制开" Value="PWM:STATe ON" Description="PWM调制开"/>
		<Command Key="PWM调制关" Value="PWM:STATe OFF" Description="PWM调制关"/>
		
		<Command Key="设置起始频率" Value="FREQuency:STARt {0} MHz" Description="设置起始频率 {0} < 频率 >|MINimum|MAXimum,单位MHz"/>
		<Command Key="设置停止频率" Value="FREQuency:STOP {0} MHz" Description="设置停止频率 {0} < 频率 >|MINimum|MAXimum,单位MHz"/>
		<Command Key="设置中心频率" Value="FREQuency:CENTer {0} MHz" Description="设置中心频率 {0} < 频率 >|MINimum|MAXimum,单位MHz"/>
		<Command Key="设置频率跨距" Value="FREQuency:SPAN {0} MHz" Description="设置频率跨距 {0} < 频率 >|MINimum|MAXimum,单位MHz"/>
		
		<Command Key="设置扫描间隔模式" Value="SWEep:SPACing {0}" Description="设置扫描间隔模式 {0} LINear|LOGarithmic"/>		
		<Command Key="读扫描时间" Value="SWEep:TIME?" Description="从起始频率到停止频率进行扫描所需的秒数。 ,MINimum|MAXimum"/>
		<Command Key="扫描模式开" Value="SWEep:STATe ON" Description="扫描模式开"/>
		<Command Key="扫描模式关" Value="SWEep:STATe OFF" Description="扫描模式关"/>
		<Command Key="置边沿触发模式" Value="OUTPut:TRIGger:SLOPe {0}" Description="设置边沿触发模式 {0} POSitive|NEGative"/>
		<Command Key="触发开" Value="OUTPut:TRIGger ON" Description="触发开"/>
		<Command Key="触发关" Value="OUTPut:TRIGger OFF" Description="触发关"/>		
      </Commands>
    </DeviceCommand>

    <DeviceCommand DeviceType="噪声系数分析仪">
      <Models>
        <string>ESG-D3000B</string>
        <string>N8975A</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value=":SYSTem:PRESet" Description="{0}频率，单位Hz"/>
        <Command Key="Center" Value=":FREQ:CENT {0}" Description="{0}频率，单位Hz"/>
        <Command Key="Span" Value=":FREQ:SPAN {0}" Description="{0}频率，单位Hz"/>
        <Command Key="Start" Value=":FREQuency:STARt {0}" Description="单位V"/>
        <Command Key="Stop" Value=":FREQuency:STOP {0}" Description="单位A"/>

        <Command Key="FIXFreqMode" Value="SENSe:FREQuency:MODE FIXed" Description="单位A"/>
        <Command Key="FIXFreq" Value=":FREQuency:FIXed {0}" Description="单位A"/>

        <Command Key="SweepPoint" Value=":SWEep:POINts {0}" Description="单位A"/>
        <Command Key="ContinuousMeasState" Value="INIT:CONT {0}" Description="单位A"/>
        <Command Key="CalState" Value="DISP:DATA:CORR {0}" Description="单位A"/>
        <Command Key="StoreStateFile" Value="MMEM:STOR:STAT 1, '{0}'" Description="单位A"/>
        <Command Key="LoadStateFile" Value="MMEM:LOAD:STAT 1, '{0}'" Description="单位A"/>
        <Command Key="Measure" Value="INIT" Description="单位A"/>
        <Command Key="OPC" Value="*OPC?" Description="方法研究"/>

        <Command Key="下变频模式" Value=":CONFigure:MODE:DUT DOWN" Description="{0}电流值，单位A，CC模式下"/>
        <Command Key="USB边带模式" Value=":CONFigure:MODE:DOWNconv:LOSCillator:OFFSet USB" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="本振频率" Value=":CONFigure:MODE:DOWNconv:LOSCillator:FREQuency {0}" Description="{0}电压值，单位V，CV模式下"/>

        <Command Key="ReadNFIG" Value="FETC:CORR:NFIG?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="ReadFIXedNFIG" Value="FETC:SCAL:CORR:NFIG?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="SetFreqList" Value="FREQuency:LIST:DATA {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="ReadFreqList" Value="FREQuency:LIST:DATA?" Description="{0}电压值，单位V，CV模式下"/>

        <Command Key="DUT后端补偿状态" Value="CORR:LOSS:AFT:STAT {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT前端补偿状态" Value="CORR:LOSS:BEF:STAT {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT后端补偿表模式" Value=":CORRection:LOSS:AFTer:MODE TABLe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT前端补偿表模式" Value=":CORRection:LOSS:BEFore:MODE TABLe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT后端补偿表" Value=":CORRection:LOSS:AFTer:TABLe:DATA {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT前端补偿表" Value=":CORRection:LOSS:BEFore:TABLe:DATA {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="获取DUT后端补偿表" Value=":CORRection:LOSS:AFTer:TABLe:DATA?" Description="{0}数据以‘，’号分格"/>
        <Command Key="获取DUT前端补偿表" Value=":CORRection:LOSS:BEFore:TABLe:DATA?" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT后端热力学温度" Value=":CORR:TEMP:AFT {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT前端热力学温度" Value=":CORR:TEMP:BEF {0}" Description="{0}数据以‘，’号分格"/>
      </Commands>
    </DeviceCommand>

    <DeviceCommand DeviceType="频谱仪">
      <Models>
        <string>E4440A</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value=":SYSTem:PRESet" Description="{0}频率，单位MHz"/>
        <Command Key="OPC" Value="*OPC?"/>
        <Command Key="START" Value=":SENS:FREQ:STAR {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="STOP" Value=":SENS:FREQ:STOP {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="CENTER" Value=":SENS:FREQ:CENT {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="SPAN" Value=":SENS:FREQ:SPAN {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="REF" Value=":DISP:WIND:TRAC:Y:SCAL:RLEV {0} dBm" Description="单位V"/>
        <Command Key="RBW" Value="BAND {0}" Description="单位A"/>
        <Command Key="ReturnRBW" Value="BAND?" Description="单位A"/>
        <Command Key="RBWAUTO" Value="BWID:AUTO ON" Description="单位A"/>
        <Command Key="VBW" Value=":BWIDth:VID {0}" Description="{0}电流值，单位A，CC模式下"/>
        <Command Key="VBWAUTO" Value=":BWIDth:VID:AUTO 1" Description="{0}电流值，单位A，CC模式下"/>
        <Command Key="PEAK" Value=":CALC:MARK{0}:MAX" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="MARK打开" Value=":CALC:MARK{0}:STAT ON" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读MARK功率" Value=":CALC:MARK{0}:Y?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读MARK频率" Value=":CALC:MARK{0}:X?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="设置MARK频率" Value=":CALC:MARK{0}:X {1} MHz" Description="{0}电压值，{1}频率点,单位V，CV模式下"/>
        <Command Key="设置MARK为NOISe" Value=":CALCulate:MARKer{0}:FUNCtion NOISe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="设置MARK为常规" Value=":CALCulate:MARKer{0}:FUNCtion OFF" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读曲线" Value="TRACe? TRACE1" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读起始频率" Value=":SENS:FREQ:STAR?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读截止频率" Value=":SENS:FREQ:STOP?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="最大保持开" Value=":TRACe1:MODE MAXHold" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="最大保持关" Value=":TRACe1:MODE WRITe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="噪声模式" Value=":CALC:MARK:FUNC NOIS" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="关闭频谱仪自检" Value=":CALibration:AUTO OFF" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="AVER_ON" Value=":AVERage ON" Description="{0}电压值，单位V，CV模式下"/>
         <Command Key="AVER_OFF" Value=":AVERage OFF" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="AVERCounts" Value=":AVERage:COUNt {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DCmode" Value=":INPut:COUPling DC" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="ACmode" Value=":INPut:COUPling AC" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="StoreStateFile" Value="MMEM:STOR:STAT 1, '{0}'" Description="单位A"/>
        <Command Key="LoadStateFile" Value="MMEM:LOAD:STAT 1, '{0}'" Description="单位A"/>
        <Command Key="SetSAMode" Value=":INST SA" Description="单位A"/>
        <Command Key="SingleOrCont" Value=":INITiate:CONTinuous {0}" Description="单位A"/>
        <Command Key="ATT" Value=":POW:ATT {0}" Description="单位A"/>
        
        <Command Key="单次扫描" Value=":INITiate:IMMediate" Description="单位A"/>
        <Command Key="测试点数读取" Value=":SENSe:SWEep:POInts?" Description="单位A"/>
        <Command Key="测试点数" Value=":SENSe:SWEep:POInts {0}" Description="单位A"/>

        <Command Key="DUT后端补偿状态" Value="CORR:LOSS:AFT:STAT {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT前端补偿状态" Value="CORR:LOSS:BEF:STAT {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT后端补偿表模式" Value=":CORRection:LOSS:AFTer:MODE TABLe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT前端补偿表模式" Value=":CORRection:LOSS:BEFore:MODE TABLe" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="DUT后端补偿表" Value=":CORRection:LOSS:AFTer:TABLe:DATA {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT前端补偿表" Value=":CORRection:LOSS:BEFore:TABLe:DATA {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="获取DUT后端补偿表" Value=":CORRection:LOSS:AFTer:TABLe:DATA?" Description="{0}数据以‘，’号分格"/>
        <Command Key="获取DUT前端补偿表" Value=":CORRection:LOSS:BEFore:TABLe:DATA?" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT后端热力学温度" Value=":CORR:TEMP:AFT {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="DUT前端热力学温度" Value=":CORR:TEMP:BEF {0}" Description="{0}数据以‘，’号分格"/>
        <Command Key="噪声系数测试" Value=":INIT:IMM" Description="单位A"/>


        <Command Key="相位噪声测试模式" Value="INSTrument PNOISE" Description="单位A"/>
        <Command Key="相位噪声测试" Value="FREQ:CARR:SEAR" Description="单位A"/>
        <Command Key="相位噪声载波频率设置" Value=":FREQ:CARR {0} MHz" Description="单位A"/>
        <Command Key="相位噪声关闭平均" Value=":LPL:AVER OFF" Description="单位A"/>
        <Command Key="相位噪声打开MarkTable" Value="CALC:LPL:MARK:TABL 1" Description="单位A"/>
        <Command Key="读Mark相位噪声值" Value=":CALC:LPLot:MARK{0}:Y?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="设置Mark频率Hz" Value="CALC:LPL:MARK{0}:X {1}"/>

        <Command Key="相位噪声startOffset" Value="LPL:FREQ:OFFS:STAR {0}" Description="单位A"/>
        <Command Key="相位噪声stopOffset" Value="LPL:FREQ:OFFS:STOP {0}" Description="单位A"/>
        
        
      </Commands>
    </DeviceCommand>
    
	
	<DeviceCommand DeviceType="频谱仪">
      <Models>
		<string>N9020A</string>
        <string>N9030A</string>
      </Models>
      <Commands>
	    <Command Key="仪器复位" Value="*RST" Description="复位"/>
        <Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
        <Command Key="单次扫描" Value=":INITiate:IMMediate" Description="单位A"/>
		
        <Command Key="START" Value=":SENS:FREQ:STAR {0} MHz" Description="{0}频率，单位MHz"/>
		<Command Key="读起始频率" Value=":SENS:FREQ:STAR?" Description="单位Hz"/>      
        <Command Key="STOP" Value=":SENS:FREQ:STOP {0} MHz" Description="{0}频率，单位MHz"/>
		<Command Key="读截止频率" Value=":SENS:FREQ:STOP?" Description="单位Hz"/>
        <Command Key="CENTER" Value=":SENS:FREQ:CENT {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="SPAN" Value=":SENS:FREQ:SPAN {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="REF" Value=":DISP:WIND:TRAC:Y:SCAL:RLEV {0} dBm" Description="{0}参考功率,单位dBm"/>
		<Command Key="OFFSET" Value=":DISP:WIND:TRAC:Y:SCAL:RLEV:OFFSet {0} dBm" Description="{0}功率补偿,单位dBm"/>
		<Command Key="ATT" Value=":POW:ATT {0}" Description="设置衰减,单位dB"/>
        <Command Key="RBW" Value=":BWIDth {0}" Description="设置分辨率带宽,{0}RBW 单位Hz"/>
		<Command Key="RBWAUTO" Value=":BWIDth:AUTO 1" Description="设置分辨率带宽自动"/>
        <Command Key="VBW" Value=":BWIDth:VID {0}" Description="设置视频带宽,{0}VBW,单位Hz"/>
        <Command Key="VBWAUTO" Value=":BWIDth:VID:AUTO 1" Description="设置视频带宽自动"/>
		
        <Command Key="PEAK" Value=":CALC:MARK{0}:MAX" Description="标记峰值,{0}MARK点"/>
		<Command Key="NextPeak" Value=":CALC:MARK{0}:MAX:NEXT" Description="标记次峰值,{0}MARK点"/>
		<Command Key="NextPeakLeft" Value=":CALC:MARK{0}:MAX:LEFT" Description="标记左峰值,{0}MARK点"/>
		<Command Key="NextPeakRight" Value=":CALC:MARK{0}:MAX:RIGHT" Description="标记右峰值,{0}MARK点"/>
		
        <Command Key="MARK打开" Value=":CALC:MARK{0}:STAT ON" Description="打开MARK，{0}MARK点"/>
        <Command Key="读MARK功率" Value=":CALC:MARK{0}:Y?" Description="读MARK功率,{0}MARK点"/>
        <Command Key="读MARK频率" Value=":CALC:MARK{0}:X?" Description="读MARK频率,{0}MARK点"/>
		<Command Key="DELT打开" Value=":CALCulate:MARKer{0} DELTa" Description="打开DELT，{0}}MARK点"/>
        <Command Key="设置MARK频率" Value=":CALC:MARK{0}:X {1} MHz" Description="设置MARK频率,{0} MARK点,{1} 频率,单位MHz"/>
        <Command Key="设置MARK为NOISe" Value=":CALCulate:MARKer{0}:FUNCtion NOISe" Description="设置MARK为NOISe,{0} MARK点"/>
        <Command Key="设置MARK为常规" Value=":CALCulate:MARKer{0}:FUNCtion OFF" Description="设置MARK为常规,{0} MARK点"/>
		<Command Key="SingleOrCont" Value=":INITiate:CONTinuous {0}" Description="设置触发模式,{0} 0|1"/>
        <Command Key="读曲线" Value="TRACe? TRACE1" Description="读曲线"/>
		
        <Command Key="SetSAMode" Value=":INSTrument SA" Description="SetSAMode"/>
        <Command Key="相位噪声测试模式" Value=":INSTrument PNOISE" Description="相位噪声测试模式"/>
		<Command Key="相位噪声测试" Value="FREQ:CARR:SEAR" Description="单位A"/>
        <Command Key="相位噪声载波频率设置" Value=":FREQ:CARR {0} MHz" Description="单位A"/>
        <Command Key="相位噪声关闭平均" Value=":LPL:AVER OFF" Description="单位A"/>
        <Command Key="相位噪声打开MarkTable" Value="CALC:LPL:MARK:TABL 1" Description="单位A"/>
        <Command Key="读Mark相位噪声值" Value=":CALC:LPLot:MARK{0}:Y?" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="设置Mark频率Hz" Value="CALC:LPL:MARK{0}:X {1}"/>
		
		<Command Key="测试点数" Value=":SWEep:POINts {0}" Description="设置扫描点,{0} integer扫描点"/>
		<Command Key="测试点数读取" Value=":SWEep:POINts?" Description="查询扫描点"/>
		
      </Commands>
    </DeviceCommand>
	
	<DeviceCommand DeviceType="频谱仪">
      <Models>
		<string>FSQ</string>
        <string>FSU</string>
      </Models>
      <Commands>
	    <Command Key="仪器复位" Value="*RST" Description="复位"/>
        <Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
		<Command Key="单次扫描" Value=":INITiate:IMMediate" Description="单位A"/>

        <Command Key="START" Value=":SENS:FREQ:STAR {0} MHz" Description="{0}频率，单位MHz"/>
		<Command Key="读起始频率" Value=":SENS:FREQ:STAR?" Description="单位Hz"/>      
        <Command Key="STOP" Value=":SENS:FREQ:STOP {0} MHz" Description="{0}频率，单位MHz"/>
		<Command Key="读截止频率" Value=":SENS:FREQ:STOP?" Description="单位Hz"/>
        <Command Key="CENTER" Value=":SENS:FREQ:CENT {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="SPAN" Value=":SENS:FREQ:SPAN {0} MHz" Description="{0}频率，单位MHz"/>
        <Command Key="REF" Value=":DISP:WIND:TRAC:Y:RLEV {0} dBm" Description="{0}参考功率,单位dBm"/>
		
		<Command Key="OFFSET" Value=":DISP:WIND:TRAC:RLEV:OFFSet {0} dBm" Description="{0}功率补偿,单位dBm"/>		
		<Command Key="ATT" Value="INP::ATT {0}" Description="设置衰减,单位dB"/>
		<Command Key="ATTAUTO" Value="INP:ATT:AUTO ON" Description="设置自动衰减,单位dB"/>
        <Command Key="RBW" Value=":BWIDth {0}" Description="设置分辨率带宽,{0}RBW 单位Hz"/>
		<Command Key="RBWAUTO" Value=":BWIDth:AUTO 1" Description="设置分辨率带宽自动"/>
        <Command Key="VBW" Value=":BWIDth:VID {0}" Description="设置视频带宽,{0}VBW,单位Hz"/>
        <Command Key="VBWAUTO" Value=":BWIDth:VID:AUTO 1" Description="设置视频带宽自动"/>
		
        <Command Key="PEAK" Value=":CALC:MARK{0}:MAX" Description="标记峰值,{0}MARK点"/>
		<Command Key="NextPeak" Value=":CALC:MARK{0}:MAX:NEXT" Description="标记次峰值,{0}MARK点"/>
		<Command Key="NextPeakLeft" Value=":CALC:MARK{0}:MAX:LEFT" Description="标记左峰值,{0}MARK点"/>
		<Command Key="NextPeakRight" Value=":CALC:MARK{0}:MAX:RIGHT" Description="标记右峰值,{0}MARK点"/>
		
        <Command Key="MARK打开" Value=":CALC:MARK{0} ON" Description="打开MARK，{0}MARK点"/>
        <Command Key="读MARK功率" Value=":CALC:MARK{0}:Y?" Description="读MARK功率,{0}MARK点"/>
        <Command Key="读MARK频率" Value=":CALC:MARK{0}:X?" Description="读MARK频率,{0}MARK点"/>
        <Command Key="设置MARK频率" Value=":CALC:MARK{0}:X {1} MHz" Description="设置MARK频率,{0} MARK点,{1} 频率,单位MHz"/>
		<Command Key="关闭所有MARK" Value=":CALC:MARK:AOFF" Description="关闭所有MARK"/>
		<Command Key="DELT打开" Value=":CALC:DELT{0} ON" Description="打开DELT，{0}DELT点"/>
		<Command Key="DELT关闭" Value=":CALC:DELT{0} OFF" Description="打开DELT，{0}DELT点"/>
		<Command Key="设置DELT频率" Value=":CALC:DELT{0}:X {1} KHz" Description="设置DELT频率,{0} DELT点,{1} 频率,单位KHz"/>
	    <Command Key="读DELT功率" Value=":CALC:DELT{0}:Y?" Description="读DELT功率,{0} DELT点,"/>
       
	    <Command Key="设置MARK为NOISe" Value=":CALCulate:MARKer{0}:FUNCtion:NOISe ON" Description="设置MARK为NOISe,{0} MARK点"/>
        <Command Key="设置MARK为常规" Value=":CALCulate:MARKer{0}:FUNCtion:NOISe OFF" Description="设置MARK为常规,{0} MARK点"/>
		<Command Key="读噪声功率谱密度" Value="CALC:MARK{0}:FUNC:NOIS:RES?" Description="读噪声功率谱密度,{0}MARK点"/>
		
		<Command Key="SingleOrCont" Value=":INITiate:CONTinuous {0}" Description="设置触发模式,{0} 0|1"/>
        <Command Key="读曲线" Value="TRACe? TRACE1" Description="读曲线"/>
		
        <Command Key="SetSAMode" Value=":INSTrument SA" Description="SetSAMode"/>
        <Command Key="相位噪声测试模式" Value="CALC:DELT{0}:FUNC:PNO ON" Description="相位噪声测试模式,{0}DELT点"/>
		<Command Key="关相位噪声测试模式" Value="CALC:DELT{0}:FUNC:PNO OFF" Description="关相位噪声测试模式,{0}DELT点"/>
		<Command Key="读相位噪声" Value="CALC:DELT{0}:FUNC:PNO:RES?" Description="读相位噪声,{0}DELT点"/>
		
		<Command Key="测试点数" Value=":SWEep:POINts {0}" Description="设置扫描点,{0} integer扫描点"/>
		<Command Key="测试点数读取" Value=":SWEep:POINts?" Description="查询扫描点"/>
		
      </Commands>
    </DeviceCommand>
	
	 <DeviceCommand DeviceType="频谱仪">
      <Models>
        <string>MS2720T</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value="*RST" Description="复位"/>
        <Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
        <Command Key="START" Value=":SENS:FREQ:STAR {0} MHz" Description="设置起始{0}频率，单位MHz"/>
		<Command Key="读起始频率" Value=":SENS:FREQ:STAR?" Description="单位Hz，"/>
		<Command Key="STEP" Value=":SENS:FREQ:STEP {0} MHz" Description="设置步进{0}频率，单位MHz"/>
		<Command Key="读频率步进" Value=":SENS:FREQ:STEP?" Description="单位Hz，"/>
        <Command Key="STOP" Value=":SENS:FREQ:STOP {0} MHz" Description="设置终止{0}频率，单位MHz"/>
		<Command Key="读截止频率" Value=":SENS:FREQ:STOP?" Description="单位Hz，"/>
        <Command Key="CENTER" Value=":SENS:FREQ:CENT {0} MHz" Description="设置中心{0}频率，单位MHz"/>
		<Command Key="读中心频率" Value=":SENS:FREQ:CENT?" Description="单位Hz"/>
        <Command Key="SPAN" Value=":SENS:FREQ:SPAN {0} MHz" Description="设置SPAN{0}频率，单位MHz"/>
		<Command Key="读SPAN" Value=":SENS:FREQ:SPAN?" Description="单位Hz"/>
		<Command Key="FullSPAN" Value=":SENS:FREQ:SPAN:FULL" Description="设置全带宽"/>	
		<Command Key="ATT" Value=":SENS:POW:ATT {0}" Description="设置衰减值{0},单位dBm"/>	
		<Command Key="读ATT" Value=":SENS:POW:ATT?" Description="查询衰减值{0},单位dBm"/>	
		<Command Key="ATTAUTO" Value=":SENS:POW:ATT:AUTO 1" Description="设置衰减自动"/>	
		<Command Key="读ATTAUTO" Value=":SENS:POW:ATT:AUTO?" Description="查询衰减自动状态"/>	
		
		<Command Key="REFAUTO" Value=":DISP:WIND:TRAC:Y:SCAL:ADJ" Description="设置参考电平自动，"/>
        <Command Key="REF" Value=":DISP:WIND:TRAC:Y:SCAL:RLEV {0} dBm" Description="设置参考电平{0}，单位dBm,range:With reference level offset = 0 dB: 30 dBm to –150 dBm"/>
		<Command Key="读REF" Value=":DISP:WIND:TRAC:Y:SCAL:RLEV?" Description="查询参考电平，单位dBm"/>
		<Command Key="SCALE" Value=":DISP:WIND:TRAC:Y:SCAL:PDIV {0} dBm" Description="设置SCALE{0}，单位dBm"/>
		<Command Key="读SCALE" Value=":DISP:WIND:TRAC:Y:SCAL:PDIV?" Description="查询SCALE，单位dBm"/>
		<Command Key="OFFSET" Value=":DISP:WIND:TRAC:Y:SCAL:OFFS {0} dBm" Description="设置功率补偿值{0}，单位dBm,range:–99.9 dB to +99.9 dB"/>
		<Command Key="读OFFSET" Value=":DISP:WIND:TRAC:Y:SCAL:OFFS?" Description="查询功率补偿值，单位dBm"/>
		
		
        <Command Key="RBW" Value=":SENSe:BWIDth:RES {0}" Description="设置RBW{0},单位Hz,range:1 Hz to 10 MHz in a 1:3 sequence"/>
		<Command Key="读RBW" Value=":SENSe:BWIDth:RES?" Description="单位Hz"/>
        <Command Key="VBW" Value=":SENSe:BWIDth:VID {0}" Description="设置VBW{0},单位Hz,range:1 Hz to 10 MHz in a 1:3 sequence"/>
		<Command Key="读VBW" Value=":SENSe:BWIDth:VID?" Description="单位Hz"/>
		<Command Key="RBWAUTO" Value=":BWIDth:RES:AUTO 1" Description="RBW自动"/>
		<Command Key="读RBWAUTO" Value=":BWIDth:RES:AUTO?" Description="读RBW自动状态"/>
        <Command Key="VBWAUTO" Value=":BWIDth:VID:AUTO 1" Description="VBW自动"/>
		<Command Key="读VBWAUTO" Value=":BWIDth:VID:AUTO?" Description="读VBW自动状态"/>
		<Command Key="设置BW线性类型" Value=":SENS:BWIDth:VID:TYPE LIN" Description="设置BW线性类型"/>
		<Command Key="设置BW对数类型" Value=":SENS:BWIDth:VID:TYPE LOG" Description="设置BW对数类型"/>
		<Command Key="读BW类型" Value=":SENS:BWIDth:VID:TYPE?" Description="读BW类型,LOGarithmic|LINear"/>
		<Command Key="设置输入阻抗" Value=":SENS:CORR:IMP:INP:MAGN {0} Ohm" Description="设置输入阻抗,{0} 50|70"/>
		<Command Key="读输入阻抗" Value=":SENS:CORR:IMP:INP:MAGN？" Description="查询输入阻抗,50|70,单位Ohm"/>
		<Command Key="设置通道功率集成带宽" Value=":SENS:CHP:BWIDth:INT {0}" Description="设置通道功率集成带宽,{0} 频率，单位Hz"/>
		<Command Key="读通道功率集成带宽" Value=":SENS:CHP:BWIDth:INT?" Description="查询通道功率集成带宽,单位Hz"/>
		
		<Command Key="多条曲线求平均值" Value=":SENS:AVER:COUNt {0}" Description="多条曲线求平均值，{0}曲线数量,2 to 65535"/>
		<Command Key="设置曲线为Normal" Value=":SENS:AVER:TYPE NONE" Description="设置曲线为Normal"/>
		<Command Key="设置曲线为Normal" Value=":TRACe{0}:OPERation NORMal" Description="设置曲线为Normal"/>
		<Command Key="设置曲线为Average" Value=":SENS:AVER:TYPE SCAL" Description="设置曲线为Average"/>
		<Command Key="设置曲线为Average" Value=":TRACe{0}:OPERation AVERage" Description="设置曲线为Average"/>
		<Command Key="最大保持开" Value=":SENS:AVER:TYPE MAX" Description="设置曲线为Max Hold"/>
		<Command Key="最大保持开" Value=":TRACe{0}:OPERation MAXHold" Description="设置曲线为Max Hold"/>
		<Command Key="最小保持开" Value=":SENS:AVER:TYPE MIN" Description="设置曲线为Min Hold"/>
		<Command Key="最小保持开" Value=":TRACe{0}:OPERation MINHold" Description="设置曲线为Min Hold"/>
		<Command Key="查询曲线模式" Value=":SENS:AVER:TYPE?" Description="查询曲线模式,NONE|SCALar|MAXimum|MINimum"/>
		<Command Key="查询曲线模式" Value=":TRACe{0}:OPERation?" Description="查询曲线模式, NORMal|MAXHold|MINHold|AVERage"/>
						
		<Command Key="配置通道为功率模式" Value=":CONFigure:CHPower" Description="配置通道为功率模式"/>
		<Command Key="设置CHPowerON" Value=":SENS:CHP:STAT 1" Description="打开通道功率"/>
		<Command Key="设置CHPowerOFF" Value=":SENS:CHP:STAT 0" Description="关闭通道功率"/>
		<Command Key="查询CHPower状态" Value=":SENS:CHP:STAT?" Description="查询通道功率状态,0|1"/>
		<Command Key="测量通道功率和功率谱密度" Value=":MEASure:ACPower?" Description="测量通道功率和功率谱密度，功率,功率谱密度"/>
		<Command Key="测量通道功率" Value=":MEASure:CHPower:CHPower?" Description="测量通道功率，功率"/>
		<Command Key="测量功率谱密度" Value=":MEASure:CHPower:DENSity?" Description="测量功率谱密度，功率谱密度"/>
		<Command Key="读通道功率和功率谱密度" Value=":READ:CHPower?" Description="读通道功率和功率谱密度，功率,功率谱密度"/>
		<Command Key="读功率谱密度" Value=":READ:CHPower:DENSity?" Description="读功率谱密度，功率谱密度"/>				
		
        <Command Key="PEAK" Value=":CALC:MARK{0}:MAX" Description="{0} MARK点,标记峰值."/>
		<Command Key="NextPeak" Value=":CALC:MARK{0}:MAX:NEXT" Description="标记次峰值,{0}MARK点"/>
		<Command Key="NextPeakLeft" Value=":CALC:MARK{0}:MAX:LEFT" Description="{0} MARK点,标记左峰值."/>
		<Command Key="NextPeakRight" Value=":CALC:MARK{0}:MAX:RIGHt" Description="{0} MARK点,标记右峰值."/>
		<Command Key="标记中心频点" Value=":CALC:MARK{0}:CENT" Description="{0}MARK点,标记中心频点"/>
        <Command Key="MARK打开" Value=":CALC:MARK{0}:STAT ON" Description="{0} MARK点,打开MARK"/>
		<Command Key="关闭所有MARK" Value=":CALC:MARK:AOFF" Description="关闭所有MARK"/>
		<Command Key="读MARK状态" Value=":CALC:MARK{0}:STAT?" Description="{0} MARK点,读MARK状态"/>
        <Command Key="读MARK功率" Value=":CALC:MARK{0}:Y?" Description="{0} MARK点,读MARK功率.单位dBm"/>
        <Command Key="读MARK频率" Value=":CALC:MARK{0}:X?" Description="{0} MARK点,读MARK频率.单位Hz"/>
        <Command Key="设置MARK频率" Value=":CALC:MARK{0}:X {1} MHz" Description="{0}MARK点，{1}频率点,单位MHz"/>
		
		<Command Key="测量相邻信道功率比" Value=":MEASure:ACPower?" Description="测量相邻信道功率比"/>
						
        <Command Key="设置MARK为NOISe" Value=":CALCulate:MARKer{0}:DELTa:NOISe 1" Description="打开标记噪声,{0},MARK点"/>
        <Command Key="设置MARK为常规" Value=":CALCulate:MARKer{0}:DELTa:NOISe 0" Description="关闭标记噪声,{0},MARK点"/>
		
		<Command Key="标记DELT频率" Value=":CALCulate:MARKer{0}:DELTa:X {1}" Description="标记Delta频率,{0},MARK点,{1},频率，单位Hz"/>
		<Command Key="查询DELT频率" Value=":CALCulate:MARKer{0}:DELTa:X?" Description="查询Delta频率,{0},MARK点,单位Hz"/>
		<Command Key="读DELT功率" Value=":CALCulate:MARKer{0}:DELTa:Y?" Description="查询Delta,{0},MARK点,单位dB"/>		
		<Command Key="DELT打开" Value=":CALCulate:MARKer{0}:DELTa 1" Description="打开Delta标记,{0},MARK点"/>
		<Command Key="DELT" Value=":CALCulate:MARKer{0}:DELTa 0" Description="关闭Delta标记,{0},MARK点"/>
		<Command Key="查询DELT标记状态" Value=":CALCulate:MARKer{0}:DELTa?" Description="查询Delta标记状态,{0},MARK点"/>

		<Command Key="SingleOrCont" Value=":INITiate:CONTinuous {0}" Description="设置触发模式,{0} 0|1"/>
        <Command Key="读曲线" Value="TRACe? TRACE1" Description="读曲线"/>
		<Command Key="曲线显示开" Value=":TRACe{0}:DISPlay 1" Description="曲线显示,{0},Trace数"/>
		<Command Key="曲线显示关" Value=":TRACe{0}:DISPlay 0" Description="曲线显示,{0},Trace数"/>
		<Command Key="读曲线显示状态" Value=":TRACe{0}:DISPlay?" Description="读曲线显示状态,{0},Trace数"/>
		
		<Command Key="触发源FreeRun" Value=":TRIGger:SOURce IMMediate" Description="设置触发源为FreeRun"/>
		<Command Key="触发源EXTernal" Value=":TRIGger:SOURce EXTernal" Description="设置触发源为EXTernal"/>
		<Command Key="触发源VIDeo" Value=":TRIGger:SOURce EXTernal" Description="设置触发源为VIDeo"/>
		<Command Key="查询触发源" Value=":TRIGger:SOURce?" Description="查询触发源IMMediate|EXTernal|VIDeo"/>
		<Command Key="设置视频触发延时" Value=":TRIGger:VIDeo:DELay {0}" Description="设置视频触发延时,<percentage> or <time>,range:–100% to +200% (–1 ms to +2 ms)"/>
		<Command Key="查询视频触发延时" Value=":TRIGger:VIDeo:DELay?" Description="查询视频触发延时"/>
		<Command Key="设置视频触发电平" Value=":TRIGger:VIDeo:LEVel {0}" Description="设置视频触发电平,range:30 dBm to –150 dBm"/>
		<Command Key="查询视频触发电平" Value=":TRIGger:VIDeo:LEVel?" Description="查询视频触发电平,range:30 dBm to –150 dBm"/>
		<Command Key="设置视频触发位置" Value=":TRIGger:VIDeo:POSition {0}" Description="设置视频触发位置,range:0% to 100%"/>
		<Command Key="查询视频触发位置" Value=":TRIGger:VIDeo:POSition?" Description="查询视频触发位置,range:0% to 100%"/>
		
      </Commands>
    </DeviceCommand>
    
	
	<DeviceCommand DeviceType="功率计">
      <Models>
        <string>E4417A</string>
      </Models>
      <Commands>
		<Command Key="仪器复位" Value="*RST" Description="复位"/>
        <Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
		
		<Command Key="设置通道偏移" Value="SENSe{0}:CORRection:GAIN2 {1}" Description="设置通道偏移量,通道{0} 1|2 ,{1} 偏移量,单位dB"/>
		<Command Key="打开通道偏移" Value="SENSe{0}:CORR:GAIN2:STATe ON" Description="打开通道偏移,通道{0} 1|2"/>
		<Command Key="关闭通道偏移" Value="SENSe{0}:CORR:GAIN2:STATe OFF" Description="关闭通道偏移,通道{0} 1|2"/>
		<Command Key="设置显示偏移" Value="CALCulate{0}:GAIN {1}" Description="设置显示偏移,通道{0} 1|2,{1} 偏移量,单位dB"/>
		<Command Key="打开显示偏移" Value="CALCulate{0}:GAIN:STATe ON" Description="打开显示偏移,通道{0} 1|2"/>
		<Command Key="关闭显示偏移" Value="CALCulate{0}:GAIN:STATe OFF" Description="关闭显示偏移,通道{0} 1|2"/>	
		<Command Key="自动平均开" Value="SENSe{0}:AVERage:COUNt:AUTO ON" Description="自动平均开,通道{0} 1|2"/>
		<Command Key="自动平均关" Value="SENSe{0}:AVERage:COUNt:AUTO OFF" Description="自动平均关,通道{0} 1|2"/>
		
		<Command Key="MEAS测量功率" Value="MEASure{0}?" Description="使用自动平均测试功率,{0} 1|2|3|4,1:上窗口上测量;2:下窗口上测量;3:上窗口下测量;4:下窗口下测量,"/>
		<Command Key="Fetch测量功率" Value="FETCh{0}?" Description="Fetch测量功率,{0} 1|2|3|4,1:上窗口上测量;2:下窗口上测量;3:上窗口下测量;4:下窗口下测量"/>		
		<Command Key="Read测量功率" Value="READ{0}?" Description="Read测量功率,{0} 1|2|3|4,1:上窗口上测量;2:下窗口上测量;3:上窗口下测量;4:下窗口下测量"/>
		<Command Key="设置视频带宽" Value="SENSe{0}:BWIDth:VIDeo {1} KHZ" Description="设置视频带宽,通道{0} 1|2, 频率{1},单位KHz"/>
		<Command Key="设置功率显示单位" Value="UNIT{0}:POW {1}" Description="设置功率显示单位,{0} 1|2|3|4,1:上窗口上测量;2:下窗口上测量;3:上窗口下测量;4:下窗口下测量, {1} W|DBM"/>
		<Command Key="设置下限" Value="CALC{0}:LIM:LOW {1}" Description="设置下限,通道{0} 1|2|3|4,1:上窗口上测量;2:下窗口上测量;3:上窗口下测量;4:下窗口下测量, 功率{1},单位dBm"/>
		<Command Key="设置上限" Value="CALC{0}:LIM:UPP {1}" Description="设置上限,通道{0} 1|2|3|4, 功率{1},单位dBm"/>
		<Command Key="打开限制开关" Value="CALC{0}:LIM:STAT ON" Description="打开限制开关,{0} 1|2|3|4"/>
		<Command Key="关闭限制开关" Value="CALC{0}:LIM:STAT OFF" Description="关闭限制开关,{0} 1|2|3|4"/>
        <Command Key="单次触发" Value="INITiate{0}:CONTinuous OFF" Description="通道{0} 1|2"/>
		<Command Key="连续触发" Value="INITiate{0}:CONTinuous ON" Description="通道{0} 1|2"/>
      </Commands>
    </DeviceCommand>
	
	<DeviceCommand DeviceType="功率计">
      <Models>
        <string>ML2487A</string>
      </Models>
      <Commands>
		<Command Key="仪器复位" Value="*RST" Description="复位"/>
        <Command Key="OPC" Value="*OPC?" Description="操作完成指出"/>
		<Command Key="IDN" Value="*IDN?" Description="查询仪器标识符"/>
		<Command Key="激活通道" Value="CHACTIV {0}" Description="激活通道,通道{0} 1|2"/>
		<Command Key="通道输入配置" Value="CHCFG {0},{1}" Description="通道输入配置,通道{0} 1|2,传感器{1} A|B"/>
		<Command Key="设置显示通道数量" Value="CHDISPN {0}" Description="设置显示通道数量,{0} 1|2"/>
		<Command Key="设置通道测量模式" Value="CHMODE {0},{1}" Description="设置通道测量模式,通道{0} 1|2,模式{1} CW|PMOD"/>
		<Command Key="设置通道显示小数位" Value="CHRES {0},{1}" Description="设置通道显示小数位,通道{0} 1|2,小数位{1}1~3"/>
		<Command Key="设置通道单位" Value="CHUNIT {0},{1}" Description="设置通道单位,通道{0} 1|2,单位{1} DBM|DBMV|DBUV|DBW|W|V"/>
		<Command Key="CWAUTO" Value="TRARMD {0},CW,AUTO" Description="设置通道CW自动触发,通道{0} 1|2"/>
		<Command Key="CWSINGLE" Value="TRARMD {0},CW,SINGLE" Description="设置通道CW单次触发,通道{0} 1|2"/>
		<Command Key="CW自动平均" Value="CWAVG {0},AUTO" Description="CW自动平均,通道{0} 1|2"/>
		<Command Key="立即触发" Value="TR1 {0}" Description="立即触发,通道{0} 1|2"/>
		<Command Key="设置FreeRun" Value="TR3" Description="将所有通道触发设置为FreeRun"/>
		
		<Command Key="复位通道峰值" Value="CHPIRST {0}" Description="复位通道峰值,通道{0} 1|2"/>
		<Command Key="读光标的值" Value="TTMKRO {0}?" Description="读光标的值,通道{0} 1|2|1&2,（百分比，功率）"/>
		<Command Key="设置测量点数" Value="YDRES {0}" Description="设置测量点数,{0} P200|P400"/>
		<Command Key="查询测量点数" Value="YDRES?" Description="查询测量点数, P200|P400"/>
		<Command Key="打开MARK" Value="MKSTATE {0},{1},ON" Description="打开MARK,通道{0} 1|2,MARK点{1}1~4"/>
		<Command Key="标记最大值" Value="MKTMAX {0}" Description="标记最大值,通道{0} 1|2"/>
		<Command Key="标记最小值" Value="MKTMIN {0}" Description="标记最小值,通道{0} 1|2"/>
		
		<Command Key="激活通道Marker" Value="MKACTN {0},{1}" Description="激活通道Marker数,通道{0} 1|2,MARK点{1} 1~4"/>
		<Command Key="标记通道峰值" Value="CHPKS {0} ON" Description="标记通道峰值,通道{0} 1|2"/>
		<Command Key="读MARK值" Value="MKACTO {0}" Description="读MARK值,包括的Maker数,Marker的功率,功率单位,功率读取时间,通道{0} 1|2"/>
      </Commands>
    </DeviceCommand>
    
    <DeviceCommand DeviceType="程控电源">
      <Models>
        <string>IT6722</string>
      </Models>
      <Commands>
        <Command Key="打开电源" Value="OUTP 1" Description="{0}频率，单位MHz"/>
        <Command Key="关闭电源" Value="OUTP 0" Description="{0}频率，单位MHz"/>
        <Command Key="设置电压" Value="VOLT {0}" Description="{0}电压值，单位V"/>
        <Command Key="设置限流" Value=":CURR {0}" Description="{0}电流值，单位A"/>
        <Command Key="读取电压" Value=":MEAS:VOLT?" Description="单位V"/>
        <Command Key="读取电流" Value=":MEAS:CURR?" Description="单位A"/>
      </Commands>
    </DeviceCommand>
	
	<DeviceCommand DeviceType="程控电源">
      <Models>
        <string>Z36-6</string>
      </Models>
      <Commands>
        <Command Key="打开电源" Value="OUT 1" Description="打开电源输出"/>
        <Command Key="关闭电源" Value="OUT 0" Description="关闭电源输出"/>
		<Command Key="读电源输出状态" Value="OUT?" Description="电源输出状态"/>
        <Command Key="设置电压" Value="PV {0}" Description="设置输出电压值,{0}电压值，单位V"/>
        <Command Key="设置限流" Value="PC {0}" Description="设置输出电流值,{0}电流值，单位A"/>
        <Command Key="读取电压" Value="MV?" Description="读取实际输出电压。单位V,返回一个6 位字符串。"/>
        <Command Key="读取电流" Value="MC?" Description="读取实际输出电流。单位A,返回一个6 位字符串。"/>
		<Command Key="设置过压保护" Value="OVP {0}" Description="设置过压保护,{0}电压值，单位V"/>
      </Commands>
    </DeviceCommand>
	
    <DeviceCommand DeviceType="电子负载">
      <Models>
        <string>IT8811</string>
      </Models>
      <Commands>
        <Command Key="打开负载" Value="SOUR:INP ON" Description="{0}频率，单位MHz"/>
        <Command Key="关闭负载" Value="SOUR:INP OFF" Description="{0}频率，单位MHz"/>
        <Command Key="读取电压" Value="FETC:VOLT?" Description="单位V"/>
        <Command Key="读取电流" Value="FETC:CURR?" Description="单位A"/>
        <Command Key="设置电流" Value="SOUR:CURR {0}" Description="{0}电流值，单位A，CC模式下"/>
        <Command Key="设置电压" Value="SOUR:VOLT {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="设置恒流模式" Value="SOUR:FUNC CURR" Description=""/>
        <Command Key="设置恒压模式" Value="SOUR:FUNC VOLT" Description=""/>
      </Commands>
    </DeviceCommand>
	
    <DeviceCommand DeviceType="矢量网络分析仪">
      <Models>
        <string>E5062A</string>
        <string>N5234A</string>
      </Models>
      <Commands>
        <Command Key="仪器复位" Value=":SYSTem:PRESet" Description="{0}频率，单位MHz"/>
        <Command Key="驻波测试模式" Value="CALC{0}:FORM SWR" Description="{0}频率，单位MHz"/>
        <Command Key="S11" Value=":CALCulate{0}:PARameter{1}:DEFine S11" Description="{0}频率，单位MHz"/>
        <Command Key="S22" Value=":CALCulate{0}:PARameter{1}:DEFine S22" Description="{0}频率，单位MHz"/>
        <Command Key="打开Mark" Value=":CALC{0}:MARK{1} ON" Description="{0}频率，单位MHz"/>
        <Command Key="设置Mark位置" Value=":CALC{0}:MARK{1}:X {2}" Description="{0}频率，单位Hz"/>
        <Command Key="读取Mark数据" Value=":CALC{0}:MARK{1}:Y?" Description="{0}频率，单位MHz"/>
        <Command Key="MarkPeak" Value=":CALC{0}:MARK{1}:FUNC:EXEC" Description="{0}频率，单位MHz"/>
        <Command Key="Start" Value=":SENS{0}:FREQ:STAR {1}" Description="{0}频率，单位Hz"/>
        <Command Key="Stop" Value=":SENS{0}:FREQ:STOP {1}" Description="{0}频率，单位Hz"/>
        <Command Key="power" Value="SOUR{0}:POW {1}" Description="{0}频率，单位Hz"/>
        <Command Key="outputON" Value="OUTP ON" Description="{0}频率，单位Hz"/>
        <Command Key="outputOFF" Value="OUTP OFF" Description="{0}频率，单位Hz"/>
        <Command Key="ATT" Value=":SOURce{0}:POWer:ATTenuation {1}" Description="{0}频率，单位Hz"/>

        <Command Key="Cont" Value=":INITiate{0}:CONTinuous 1" Description="{0}频率，单位Hz"/>
        <Command Key="IMM" Value=":TRIG:SOUR INT" Description="{0}频率，单位Hz"/>
        <Command Key="MAX" Value=":CALC{0}:MARK1:FUNC:TYPE MAX" Description="{0}频率，单位Hz"/>
        <Command Key="TRACK" Value=" :CALC{0}:MARK1:FUNC:TRAC 1" Description="{0}频率，单位Hz"/>
       
        <Command Key="MarkStart" Value=":CALC{0}:MARK1:FUNC:DOM:STAR {1}" Description="{0}频率，单位Hz"/>
        <Command Key="MarkStop" Value=":CALC{0}:MARK1:FUNC:DOM:STOP {1}" Description="{0}频率，单位Hz"/>
        <Command Key="SearchRange" Value=":CALC{0}:MARK:FUNC:DOM {1}" Description="{0}频率，单位Hz"/>

        <Command Key="Save" Value=":MMEM:STOR {0}" Description="{0}频率，单位Hz"/>
        <Command Key="Recall" Value=":MMEM:LOAD {0}" Description="{0}频率，单位Hz"/>

        <Command Key="执行一次测试" Value=":INIT{0}"/>
        <Command Key="读取Start" Value=":SENS{0}:FREQ:STAR?"/>
        <Command Key="读取Stop" Value=":SENS{0}:FREQ:STOP?"/>
        <Command Key="读取SweepPoints" Value=":SENSe{0}:SWEep:POINts?"/>
        <Command Key="Single" Value=":INITiate{0}:CONTinuous 0" Description="{0}频率，单位Hz"/>
        <Command Key="GetTrace" Value="CALC:DATA:FDATA?"/>
        <Command Key="GetXvalue" Value="SENS:X?"/>
        <Command Key="GetXvalue_待测试" Value="CALC:X?"/>
        <Command Key="OPC" Value="*OPC?"/>
      </Commands>
    </DeviceCommand>

    <DeviceCommand DeviceType="示波器">
      <Models>
        <string>DSO-X\s3024A</string>
        <string>DSO-X 3024A</string>
        <string>DSO-X 3054A</string>
      </Models>
      <Commands>
        <Command Key="OPC" Value="*OPC?"/>
        <Command Key="RUN" Value=":RUN" Description="{0}频率，单位MHz"/>
        <Command Key="STOP" Value=":STOP" Description="{0}频率，单位MHz"/>
        <Command Key="Single" Value=":SINGle" Description="{0}频率，单位MHz"/>
        <Command Key="UNIT设置为Volt" Value=":CHANnel{0}:UNITs VOLT" Description="单位A"/>
        <Command Key="Scale" Value=":CHANnel{0}:SCALe {1}V" Description="单位V"/>
        <Command Key="通道offset" Value=":CHANnel{0}:OFFSet {1}V" Description="{0}电流值，单位V，CC模式下"/>
        <Command Key="50欧姆电阻" Value=":CHANnel{0}:IMPedance FIFTy" Description="{0}电流值，单位V，CC模式下"/>
        <Command Key="ACorDC" Value=":CHANnel{0}:COUPling {1}" Description="{0}电流值，单位V，CC模式下"/>

        <Command Key="TimeBase" Value=":TIMebase:SCALe {0}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="POSition" Value=":TIMebase:POSition {0}" Description="{0}电压值，单位V，CV模式下"/>

        <Command Key="边沿触发" Value=":TRIGger:MODE EDGE" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="通道触发电平" Value=":TRIGger:LEVel {0}V,CHANnel{1}" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="触发斜率" Value=":TRIGger:SLOPe {0}" Description="{0}电压值，单位V，CV模式下,POS,NEG,EITH,ALT"/>
        <Command Key="触发源" Value=":TRIGger:SOURce CHANnel{0}" Description="{0}电压值，单位V，CV模式下"/>

        <Command Key="清除测量方法" Value=":MEASure:CLEar" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="相移测量" Value=":MEASure:PHASe CHAN1,CHAN2" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读取相移数据" Value=":MEASure:PHASe?" Description="{0}电压值，单位V，CV模式下"/>

        <Command Key="峰峰值测量" Value=":MEASure:VPP CHAN2" Description="{0}电压值，单位V，CV模式下"/>
        <Command Key="读取峰峰值" Value=":MEASure:VPP?" Description="{0}电压值，单位V，CV模式下"/>

      </Commands>
    </DeviceCommand>

  </Devices>
</ScpiCommands>