JG_TpsLabStudio_LTS/tps/TpsLabStudio/models/PowerAndFreqStability.cs

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using Tps_LQ_Transmitter.com;

namespace Tps_LQ_Transmitter.models
{
    class PowerAndFreqStability: BaseModel
    {
        double[,] WTempPowerVal;
        double[,] dBTempPowerVal;
        string serial = "****";

        public PowerAndFreqStability()
        {
            TemplateName = "功率及频率稳定度测试";
        }
        /// <summary>
        /// 功率及频率稳定度测试
        /// </summary>
        public override bool Run(TestNode parameters)
        {
            double y_value, x_value;

            Random random = new Random();

            //获取仪器
            var SA = this.tps.GetDevice("频谱仪");
          

            TransmitterSerialPort SerialClient = new TransmitterSerialPort();
            PowerAndFreqStabilityOutData Data = new PowerAndFreqStabilityOutData();
            DataType PowerPrint = new DataType();//功率(dBm)
            DataType FreqPrint = new DataType();//实测频率
            DataType FreqAccuracyPrint = new DataType();//频率稳定度
            DataType PowerSumPrint = new DataType();//两路功率总和(w)
            DataType PowerFlatnessPrint = new DataType();//两路功率不平度（dB）

            if (SA == null)
            {
                ShowMessage(MsgType.Error, string.Format("仪器不齐全，{0}/{1}无法运行", parameters.Channel, parameters.Name));
                return false;
            }
          //  y_value = double.Parse(SA.Query("读通道功率"));
            OpenExcel("功率及频率稳定度", out Spire.Xls.Workbook workbook, out Spire.Xls.Worksheet sheet);
            if (sheet == null)
            {
                ShowMessage(MsgType.Error, "找不到" + tps.TestProject + "模板.xlsx");
                return false;
            }

            ConfigParameter PowerPara = new ConfigParameter();
            PowerPara.ComPort = parameters.Parameters.GetParameter<string>("串口");
            PowerPara.OutLoss = parameters.Parameters.GetParameter<double>("输出损耗");
            PowerPara.StartFrequency = parameters.Parameters.GetParameter<double>("起始频率");
            PowerPara.StepFrequency = parameters.Parameters.GetParameter<double>("频率步进");
            PowerPara.FrequencyNumber = parameters.Parameters.GetParameter<int>("频点数量");
            PowerPara.StopFrequency = parameters.Parameters.GetParameter<double>("终止频率");
            PowerPara.SPAN = parameters.Parameters.GetParameter<string>("扫描带宽（SPAN）");
            PowerPara.ACHBand = parameters.Parameters.GetParameter<string>("通道带宽");
            PowerPara.REF = parameters.Parameters.GetParameter<string>("参考电平（REF）");
            PowerPara.RBW = parameters.Parameters.GetParameter<string>("分辨率带宽（RBW）");
            PowerPara.VBW = parameters.Parameters.GetParameter<string>("视频带宽（VBW）");
            PowerPara.ControlDelay = parameters.Parameters.GetParameter<int>("控制延时");
            PowerPara.PowerLower = parameters.Parameters.GetParameter<double>("功率下限");
            PowerPara.PowerUpper = parameters.Parameters.GetParameter<double>("功率上限");
            PowerPara.FreqAccuracyUpper = parameters.Parameters.GetParameter<double>("频率稳定度上限");
            PowerPara.PowerSumLower = parameters.Parameters.GetParameter<double>("两路功率总和下限");
            PowerPara.PowerFlatnessUpper = parameters.Parameters.GetParameter<double>("功率不平度上限");
            if ((PowerPara.StartFrequency == 0) || ((PowerPara.StepFrequency == 0) && (PowerPara.FrequencyNumber == 0)) || (PowerPara.StopFrequency == 0)
                || (PowerPara.SPAN == null) || (PowerPara.REF == null) || (PowerPara.RBW == null) || (PowerPara.VBW == null) || (PowerPara.PowerLower == 0)
                || (PowerPara.PowerUpper == 0) || (PowerPara.FreqAccuracyUpper == 0) ||(PowerPara.PowerSumLower == 0) || (PowerPara.PowerFlatnessUpper == 0))
            {
                ShowMessage(MsgType.Error, string.Format("配置文件中频率参数为空，{0}/{1}无法运行", parameters.Channel, parameters.Name));
                return false;
            }
            if (PowerPara.ControlDelay == 0)
            {
                PowerPara.ControlDelay = 10;
            }
            if(true)//需具备仪器
            {
                SA.Write("仪器复位"); SA.Query("OPC");
                SA.Write("SPAN", PowerPara.SPAN); SA.Query("OPC");
                SA.Write("RBW", PowerPara.RBW); SA.Query("OPC");
                SA.Write("VBW", PowerPara.VBW); SA.Query("OPC");
                SA.Write("REF", PowerPara.REF); SA.Query("OPC");
                if (SA.Query("IDN").Contains("N9030"))
                {
                    SA.Write("设置通道SPAN", PowerPara.SPAN); SA.Query("OPC");
                }

                SA.Write("设置通道带宽", PowerPara.ACHBand); SA.Query("OPC");

               

                
                SA.Write("SingleOrCont", "0"); SA.Query("OPC");

            }
            if ((PowerPara.FrequencyNumber != 0) && (PowerPara.FrequencyNumber != 1) && (PowerPara.StepFrequency == 0))
            {
                PowerPara.StepFrequency = ((int)(((PowerPara.StopFrequency - PowerPara.StartFrequency) / (PowerPara.FrequencyNumber - 1)) * 100)) / 100;
            }
            if (PowerPara.StepFrequency != 0)
            {
                PowerPara.FrequencyNumber = ((int)((PowerPara.StopFrequency - PowerPara.StartFrequency) / PowerPara.StepFrequency)) + 1;
            }
            double CenterFreq;
            Data.Power = new double[PowerPara.FrequencyNumber];
            Data.Freq = new double[PowerPara.FrequencyNumber];
            Data.FreqAccuracy = new double[PowerPara.FrequencyNumber];
            if (tps.Serial != serial)
            {
                WTempPowerVal = new double[2, PowerPara.FrequencyNumber] ;
                dBTempPowerVal = new double[2, PowerPara.FrequencyNumber];
                serial = tps.Serial;
                for (int initVal1 = 0; initVal1 < 2; initVal1++)
                {
                    for (int initVal2 = 0; initVal2 < PowerPara.FrequencyNumber; initVal2++)
                    {
                        WTempPowerVal[initVal1, initVal2] = -100;
                        dBTempPowerVal[initVal1, initVal2] = -100;
                    }
                }
            }

            for (int point = 0; ; point++)
            {

                CenterFreq = PowerPara.StartFrequency + PowerPara.StepFrequency * point;
                if (CenterFreq > PowerPara.StopFrequency || (PowerPara.FrequencyNumber == 1 && point == 1))
                {
                    break;
                }
                if (true)//需具备仪器
                {
                    //控制
                  //  SerialClient.DUT_Transmitter_Ctrol(PowerPara.ComPort, Convert.ToByte(point + 1));
                    Thread.Sleep(PowerPara.ControlDelay);//单位ms


                    SA.Write("CENTER", CenterFreq.ToString()); SA.Query("OPC");
                    SA.Write("单次扫描"); SA.Query("OPC");
               
                    
                    SA.Write("设置通道功率模式"); SA.Query("OPC");
                    if (SA.Query("IDN").Contains("N9030"))
                    {
                        PsaPeakValue_CHTracedata(SA, out y_value, out x_value, true);
                        y_value = double.Parse(SA.Query("读通道功率").Split(',')[0]);
                    }
                    else
                    {
                        PsaPeakValue_CHTracedata(SA, out y_value, out x_value, true);
                        y_value = double.Parse(SA.Query("读通道功率"));

                    }  
                    

                    Data.Power[point] = y_value + PowerPara.OutLoss;//功率

                }

                //Data.Power[point] = random.Next(3000, 4000) / 100.0;//随机数
                PowerPrint.Test_name = parameters.Channel + "-功率测试(W)-" + CenterFreq.ToString() + "MHz";
                PowerPrint.Lower = PowerPara.PowerLower;
                PowerPrint.Upper = PowerPara.PowerUpper;
                PowerPrint.TestVal = Math.Round(Math.Pow(10, (Data.Power[point] / 10)) / 1000, 2);//功率W

                if ((PowerPrint.TestVal >= PowerPrint.Lower) && (PowerPrint.TestVal <= PowerPrint.Upper))
                {
                    PowerPrint.Result = "是";
                }
                else
                {
                    PowerPrint.Result = "否";
                }
                FreqPrint.Test_name = parameters.Channel + "-频率测试(MHz)-" + CenterFreq.ToString() + "MHz";
                FreqPrint.Lower =Math.Round(0-((PowerPara.FreqAccuracyUpper * CenterFreq) + CenterFreq),2);
                FreqPrint.Upper = Math.Round((PowerPara.FreqAccuracyUpper * CenterFreq) + CenterFreq,2);
                FreqPrint.TestVal = Math.Round(x_value / 1000000, 3);//实测频率
                //FreqPrint.TestVal = random.Next(-600, 6000) / 100.0 + CenterFreq;//随机数
                if ((FreqPrint.TestVal >= FreqPrint.Lower) && (FreqPrint.TestVal <= FreqPrint.Upper))
                {
                    FreqPrint.Result = "是";
                }
                else
                {
                    FreqPrint.Result = "否";
                }

                FreqAccuracyPrint.Test_name = parameters.Channel + "-频率稳定度测试-" + CenterFreq.ToString() + "MHz";
                FreqAccuracyPrint.Upper = PowerPara.FreqAccuracyUpper;
                FreqAccuracyPrint.TestVal = Math.Round(Math.Abs(x_value - CenterFreq * 1000000) / (CenterFreq * 1000000), 6);//频率稳定度
                //FreqAccuracyPrint.TestVal = Math.Round(Math.Abs((random.Next(-600, 6000) / 100.0 + CenterFreq)*1000000 - CenterFreq * 1000000) / (CenterFreq * 1000000), 6);//随机数
                if (FreqAccuracyPrint.TestVal <= FreqAccuracyPrint.Upper)
                {
                    FreqAccuracyPrint.Result = "是";
                }
                else
                {
                    FreqAccuracyPrint.Result = "否";
                }
                tps.TestTableAddCell(PowerPrint.Test_name, "/", PowerPrint.Upper.ToString(), PowerPrint.TestVal.ToString(), PowerPrint.Result);
                tps.TestTableAddCell(FreqPrint.Test_name, FreqPrint.Lower.ToString(), FreqPrint.Upper.ToString(), FreqPrint.TestVal.ToString(), FreqPrint.Result);
                if (parameters.Channel == "通道1")
                {
                    if (point == 0)
                    {
                        WriteExcelData(sheet, point - 1, 1, "测试名称", "下限", "上限", "测试值", "通过");
                    }
                    WriteExcelData(sheet, point, 1, PowerPrint.Test_name, "/", PowerPrint.Upper.ToString(), PowerPrint.TestVal.ToString(), PowerPrint.Result);
                    WriteExcelData(sheet, point+15, 1, FreqPrint.Test_name, FreqPrint.Lower.ToString(), FreqPrint.Upper.ToString(), FreqPrint.TestVal.ToString(), FreqPrint.Result);
                    //tps.SetTestTableCellValue(point, 10, PowerPrint.Result, PowerPrint.TestVal);
                    //tps.SetTestTableCellValue(point, 7, FreqPrint.Result, FreqPrint.TestVal);
                }
                else if (parameters.Channel == "通道2")
                {
                    if (point == 0)
                    {
                        WriteExcelData(sheet, point - 1, 2, "测试名称", "下限", "上限", "测试值", "通过");
                    }
                    WriteExcelData(sheet, point, 2, PowerPrint.Test_name, "/", PowerPrint.Upper.ToString(), PowerPrint.TestVal.ToString(), PowerPrint.Result);
                    WriteExcelData(sheet, point+15, 2, FreqPrint.Test_name, "/", FreqPrint.Upper.ToString(), FreqPrint.TestVal.ToString(), FreqPrint.Result);
                    //tps.SetTestTableCellValue(point, 11, PowerPrint.Result, PowerPrint.TestVal);
                    //tps.SetTestTableCellValue(point + 15, 7, FreqPrint.Result, FreqPrint.TestVal);
                }

                #region 功率不平度及两路功率总和计算
                if (parameters.Channel == "通道1")
                {
                    WTempPowerVal[0, point] = PowerPrint.TestVal;//W
                    dBTempPowerVal[0, point] = Data.Power[point];//dB
                }
                else
                {
                    WTempPowerVal[1, point] = PowerPrint.TestVal;//W
                    dBTempPowerVal[1, point] = Data.Power[point];//dB
                }

                if (WTempPowerVal[0, point] > -100 && WTempPowerVal[1, point] > -100)
                {
                    PowerSumPrint.Test_name =  "两路功率总和(W)-" + CenterFreq.ToString() + "MHz";
                    PowerSumPrint.Lower = PowerPara.PowerSumLower;
                    PowerSumPrint.TestVal = Math.Round(WTempPowerVal[0, point] + WTempPowerVal[1, point],2);//W
                    if ((PowerSumPrint.TestVal >= PowerSumPrint.Lower) && (PowerSumPrint.TestVal <= PowerSumPrint.Upper))
                    {
                        PowerSumPrint.Result = "是";
                    }
                    else
                    {
                        PowerSumPrint.Result = "否";
                    }
                    PowerFlatnessPrint.Test_name =  "功率不平度(dB)-" + CenterFreq.ToString() + "MHz";
                    PowerFlatnessPrint.Upper = PowerPara.PowerFlatnessUpper;
                    PowerFlatnessPrint.TestVal = Math.Round(Math.Abs(dBTempPowerVal[0, point] - dBTempPowerVal[1, point]),2);//dB
                    if ((PowerFlatnessPrint.TestVal >= PowerFlatnessPrint.Lower) && (PowerFlatnessPrint.TestVal <= PowerFlatnessPrint.Upper))
                    {
                        PowerFlatnessPrint.Result = "是";
                    }
                    else
                    {
                        PowerFlatnessPrint.Result = "否";
                    }
                    if (point == 0)
                    {
                        WriteExcelData(sheet, point - 1, 3, "测试名称", "下限", "上限", "测试值", "通过");
                        WriteExcelData(sheet, point - 1, 4, "测试名称", "下限", "上限", "测试值", "通过");
                    }
                    tps.TestTableAddCell(PowerSumPrint.Test_name, PowerSumPrint.Lower.ToString(), "/", PowerSumPrint.TestVal.ToString(), PowerSumPrint.Result);
                    tps.TestTableAddCell(PowerFlatnessPrint.Test_name, PowerFlatnessPrint.Lower.ToString(), "/", PowerFlatnessPrint.TestVal.ToString(), PowerFlatnessPrint.Result);
                    WriteExcelData(sheet, point, 3, PowerSumPrint.Test_name, PowerSumPrint.Lower.ToString(), "/", PowerSumPrint.TestVal.ToString(), PowerSumPrint.Result);
                    WriteExcelData(sheet, point, 4, PowerFlatnessPrint.Test_name, PowerFlatnessPrint.Lower.ToString(), "/", PowerFlatnessPrint.TestVal.ToString(), PowerFlatnessPrint.Result);
                    //tps.SetTestTableCellValue(point, 12, PowerSumPrint.Result, PowerSumPrint.TestVal);
                    //tps.SetTestTableCellValue(point, 13, PowerFlatnessPrint.Result,PowerFlatnessPrint.TestVal);

                }
                #endregion
            }
            SaveExcel(workbook);
            return true;
        }

        

        public void PsaPeakValue_CHTracedata(AppLibs.Devices.IVISA psa, out double Y_Maxvalue, out double X_Maxvalue, bool IsReturnX = false)
        {
            System.Threading.Thread.Sleep(20);
            X_Maxvalue = 0;
            Y_Maxvalue = 0;

            psa.Write("单次扫描");

            psa.Query("OPC");
            
            //string tracedata = psa.Query("读曲线");
            string tracedata = psa.Query("读通道曲线");
            string[] tracedatas = tracedata.Split(',');
            double[] tracedata_double = new double[tracedatas.Length-1];
            for (int i = 0; i < tracedatas.Length-1; i++)
            {
                tracedata_double[i] = double.Parse(tracedatas[i]);
            }
            Y_Maxvalue = tracedata_double.Max();
            if (IsReturnX)
            {
                int x = Array.IndexOf(tracedata_double, Y_Maxvalue);
                double startfreq = double.Parse(psa.Query("读起始频率"));
                double stopfreq = double.Parse(psa.Query("读截止频率"));
                double counts = double.Parse(psa.Query("测试点数读取"));
                X_Maxvalue = startfreq + (stopfreq - startfreq) * x / (counts - 2);
            }
            Y_Maxvalue = Math.Round(Y_Maxvalue, 3);
        }
        public void PsaPeakValue_Tracedata(AppLibs.Devices.IVISA psa, out double Y_Maxvalue, out double X_Maxvalue, bool IsReturnX = false)
        {
            System.Threading.Thread.Sleep(20);
            X_Maxvalue = 0;
            Y_Maxvalue = 0;

            psa.Write("单次扫描");

            psa.Query("OPC");

            string tracedata = psa.Query("读曲线");
           // string tracedata = psa.Query("读通道曲线");
            string[] tracedatas = tracedata.Split(',');
            double[] tracedata_double = new double[tracedatas.Length - 1];
            for (int i = 0; i < tracedatas.Length - 1; i++)
            {
                tracedata_double[i] = double.Parse(tracedatas[i]);
            }
            Y_Maxvalue = tracedata_double.Max();
            if (IsReturnX)
            {
                int x = Array.IndexOf(tracedata_double, Y_Maxvalue);
                double startfreq = double.Parse(psa.Query("读起始频率"));
                double stopfreq = double.Parse(psa.Query("读截止频率"));
                double counts = double.Parse(psa.Query("测试点数读取"));
                X_Maxvalue = startfreq + (stopfreq - startfreq) * x / (counts - 2);
            }
            Y_Maxvalue = Math.Round(Y_Maxvalue, 3);
        }
        public class ConfigParameter
        {
            /// <summary>
            /// 串口
            /// </summary>
            public string ComPort { set; get; }
            /// <summary>
            /// 输出损耗
            /// </summary>
            public double OutLoss { set; get; }
            /// <summary>
            /// 产品测试的起始频率
            /// </summary>
            public double StartFrequency { set; get; }
            /// <summary>
            /// 产品测试的频率步进
            /// </summary>
            public double StepFrequency { set; get; }
            /// <summary>
            /// 产品测试的频点数量
            /// </summary>
            public int FrequencyNumber { set; get; }
            /// <summary>
            /// 产品的工作频带上限(终止频率)
            /// 功能：用于判断从起始频率按一定的步进测试是否超出产品工作频段上限
            /// </summary>
            public double StopFrequency { set; get; }
            /// <summary>
            ///设置频谱仪的SPAN
            /// </summary>
            public string SPAN { set; get; }
            /// <summary>
            /// 通道带宽
            /// </summary>
            public string ACHBand { set; get; }
            /// <summary>
            /// 设置参考电平
            /// </summary>
            public string REF { set; get; }
            /// <summary>
            /// 设置RBW
            /// </summary>
            public string RBW { set; get; }
            /// <summary>
            /// 设置VBW
            /// </summary>
            public string VBW { set; get; }
            /// <summary>
            /// 控制延时
            /// </summary>
            public int ControlDelay { set; get; }
            /// <summary>
            /// 功率下限
            /// </summary>
            public double  PowerLower { set; get; }
            /// <summary>
            /// 功率上限
            /// </summary>
            public double PowerUpper { set; get; }
            /// <summary>
            /// 频率稳定度上限
            /// </summary>
            public double FreqAccuracyUpper { set; get; }
            /// <summary>
            /// 两路功率总和下限
            /// </summary>
            public double PowerSumLower { set; get; }
            /// <summary>
            /// 功率不平度上限
            /// </summary>
            public double PowerFlatnessUpper { set; get; }

        }

        public class PowerAndFreqStabilityOutData
        {
            /// <summary>
            /// 输出功率(W)
            /// </summary>
            public double[] Power { set; get; }
           /// <summary>
           /// 频率稳定度
           /// </summary>
            public double[] FreqAccuracy { set; get; }
            /// <summary>
            /// 实测频点
            /// </summary>
            public double[] Freq { set; get; }
            /// <summary>
            /// 两路功率总和(W)
            /// </summary>
            public double[] PowerSum { set; get; }
            /// <summary>
            /// 两路功率不平度(dB)
            /// </summary>
            public double[] PowerFlatness { set; get; }

        }
        //public class DataType
        //{

        //    /// <summary>
        //    /// 测试名称
        //    /// </summary>
        //    public string Test_name { set; get; }
        //    /// <summary>
        //    /// 指标下限
        //    /// </summary>
        //    public double Lower { set; get; }
        //    /// <summary>
        //    /// 指标上限
        //    /// </summary>
        //    public double Upper { set; get; }
        //    /// <summary>
        //    /// 测试值
        //    /// </summary>
        //    public double TestVal { set; get; }
        //    /// <summary>
        //    /// 判断结果
        //    /// </summary>
        //    public bool Result { set; get; }


        //}
    }
}